1. Remove Grate.
2. Install Bag.
   *Bag rests on lip of casting
3. Reinstall Grate.
4. Install Bonnet Guard with tabs between Grate & Bonnet casting.

1. Remove the Bonnet Guard.
2. Remove Grate.
3. Bag can be cleaned several ways
   a) Pick up bag and dump it
   b) Shovel debris out of bag
   c) Vac-Unit
4. Shake loose debris out of Bag or rise with water.
5. Reinstall Bag.
6. Reintall Grate.
7. Reinstall Bonnet Guard.

Available from:

Frye Flow Systems
P.O. Box 622
Granville, OH 43023
email:

1. Remove Grate.
2. Install Frye Flow Systems Debris Bag.
   *Bag rests on lip of casting
3. Reinstall Grate.

1. Remove Grate.
2. Bag can be cleaned several ways
   a) Pick up bag and dump it
   b) Shovel debris out of bag
   c) Vac-Unit
3. Shake loose debris out of Bag or rise with water.
4. Reinstall Frye Flow Systems Debris Bag.
5. Reintall Grate.

Available from:

Frye Flow Systems
P.O. Box 622
Granville, OH 43023
email:

1. Remove Grate.
2. Install Frye Flow Systems Debris Bag.
   *Bag rests on lip of casting
3. Reinstall Grate.

1. Remove Grate.
2. Bag can be cleaned several ways
   a) Pick up bag and dump it
   b) Shovel debris out of bag
   c) Vac-Unit
3. Shake loose debris out of Bag or rise with water.
4. Reinstall Frye Flow Systems Debris Bag.
5. Reintall Grate.

Available from:

Frye Flow Systems
P.O. Box 622
Granville, OH 43023
email:

1. Insert Rebar into pockets of Debris Bag.
2. Install FryeFlow Systems Debris Bag into Angle Iron Frame.
3. Make sure Angle Iron sets behind Rebar brackets.
4. Make sure Frame and Bag is set on flat surface.

1. Once Debris Bag is full, use handles provided to lift out of frame.
2. Remove Rebar from side pouches.
3. Insert new FryeFlow Systems Debris Bag.
4. Properly dispose of used bag of concrete waste.

Available in sizes:
2' x 6' & 4' x 6'

Available from:

Frye Flow Systems
P.O. Box 622
Granville, OH 43023
email: